Wheels & brake calipers cleaned with non corrosive cleaners; front of wheel, rear of spokes and inner barrel (Add-On Available, See Below).

Under arches pressure rinsed and door & boot shuts cleaned; engine compartment cleared of light soiling. 

Thorough hot pressure rinse followed by a hot foam pre-wash, removing lose grit from the paint surface. 

Safe wash process to remove remaining soiling; pH neutral shampoo, three buckets and premium wash mitt used.

Three-step decontamination process; removing tar spotting/adhesives, metallic fallout and claybar to restore a smooth finish.

Vehicle carefully towel dried; warm filtered air to blow out trapped water. 

Paintwork inspection carried out; paint thickness measurements taken to highlight concerning areas and various lighting sources to highlight multiple types of defect. 

Two stage machine polish process;  first using an abrasive polish to remove swirling and light scratches, second with a fine finishing polish to refine the finish.
NOTE: We aim for an approximate 70-80% removal of swirling and surface defects; severe swirling and scratches will remain present if too deep for the abrasive polish step to remove, or, if paint thickness' do not allow.

GYEON Q2WAX  protection applied to all painted areas. (Upgrade Available, See Below).

Exterior plastics dressed (Upgrade Available, See Below).

Internal and external glass cleaned.

Engine compartment dressed.

Interior vacuumed and dashboard dusted (Add-On Available, See Below).

Final inspection and wipe down using a quick detailer.