Wheels & brake calipers cleaned with non corrosive cleaners; front of wheel, rear of spokes and inner barrel (Add-On Available, See Below).

Under arches pressure rinsed and door & boot shuts cleaned; engine compartment cleared of light soiling. 

Thorough pressure rinse followed by a hot foam pre-wash, removing lose grit from the paint surface. 

Safe wash process to remove remaining soiling; pH neutral shampoo, three buckets and premium wash mitt used.

Three-step decontamination process; removing tar spotting/adhesives, metallic fallout and claybar to restore a smooth finish.

Vehicle carefully towel dried; warm filtered air to blow out trapped water. 

Paintwork inspection carried out; paint thickness measurements taken to highlight concerning areas and various lighting sources to highlight multiple types of defect. 

Multiple step machine polishing process to restore the paintwork to as close to perfect as can be, providing the most flawless finish manageable. 
NOTE: Whilst the aim is 99-100% correction sometimes this is not possible due to thin paint thicknesses, scratches below the clear coat and non-original paintwork limiting what can be removed. In these cases we will always aim for the best possible results whilst retaining the integrity of the vehicles paint.
This service will NOT remove paint texture (orange peel). 

GYEON Q2WAX  protection applied to all painted areas. (Upgrade Available, See Below).

Exterior plastics dressed (Upgrade Available, See Below).

Internal and external glass cleaned.

Engine compartment dressed.

Interior vacuumed and dashboard dusted (Add-On Available, See Below).

Final inspection and wipe down using a quick detailer.