press to zoom

press to zoom

press to zoom

press to zoom

Correction Detail

If you seek the most flawless paint correction look no further. A multiple stage machine polishing process will remove all defects where possible whilst simultaneously enriching colour and extracting the deepest gloss the paint can give. This service will return a vehicle of any age back to a condition that could be mistaken for being brand new, even if the vehicle is aged by the decades.

The Process

  • Wheels & brake calipers cleaned with non corrosive cleaners; front of wheel, rear of spokes and inner barrel (Add-On Available, See Below).

  • Under arches and door & boot shuts cleaned; engine compartment cleared of light soiling. 

  • Thorough pressure rinse followed by a foam pre-wash, removing lose grit from the paint surface. 

  • Safe wash process to remove remaining soiling; pH neutral shampoo, three buckets and premium wash mitt used.

  • Three-step decontamination process; removing tar spotting/adhesives, metallic fallout and claybar to restore a smooth finish.

  • Vehicle carefully towel dried; warm filtered air to blow out trapped water. 

  • Paintwork inspection carried out; paint thickness measurements taken to highlight concerning areas and various lighting sources to highlight multiple types of defect. 

  • Multiple step machine polishing process to restore the paintwork to as close to perfect as can be, providing the most flawless finish manageable. 
    NOTE: Whilst the aim is 99-100% correction sometimes this is not possible due to thin paint thicknesses, scratches below the clear coat and non-original paintwork limiting what can be removed. In these cases we will always aim for the best possible results whilst retaining the integrity of the vehicles paint.
    This service will NOT remove paint texture (orange peel). 

  • Carnauba wax or synthetic sealant protection applied to all painted areas. (Upgrade Available, See Below).

  • Exterior plastics dressed with a trim gel (Upgrade Available, See Below).

  • Internal and external glass cleaned.

  • Engine compartment dressed.

  • Interior vacuumed and dashboard dusted (Add-On Available, See Below).

  • Final inspection and wipe down using a quick detailer.

Service Cost

From £POA

Time Required

From 3+ Days

An inspection of the vehicle is required prior to any estimated cost for this service being provided.

Our Recommended Upgrades

  • Gyeon Quartz CERTIFIED Ceramic Coating - additional £275 (add 1 Day)
    - 5 Years Warranted Protection - Exclusive to GYEON Certified Detailers - Paintwork ONLY - 

  • Gyeon Quartz CERTIFIED All Surface Package - Additional £550 (Add 2 Days)
    - Includes: Paintwork, Wheel (Inside/Out), Brake Caliper, Exhaust, Trim and  Exterior Glass Coatings -

*Installed by a GYEON Quartz Certified Detailer for the highest standard in application & performance*

Add-on Services

  • Paint Protection Film (PPF) - From £1300
    Self Healing - Non-Yellowing - Stone Chip Prevention -

  • Alloy Wheel Refinishing - From £75 per wheel
    - Powdercoating - Diamond Cutting - Matte / Satin Finish Available -

  • Brake Caliper Refinishing - From £260
    - All Colours Available - Decals Included - Matte / Satin Finish Available -

  • Interior Detailing - From £POA
     Leather Cleansing - Fabric Shampoo - Interior Surface Protection - 

  • Wheels Off Deep Cleanse - From £100
    - Wheels Removed - Wheels, Under Arches and Suspension Deep Cleansed -

  • Paintless Dent Removal - From £POA
    - Car Park Dink & Dent Removal - No Bodyshop Required -